You are searching about What Does The C Mean In Math, today we will share with you article about What Does The C Mean In Math was compiled and edited by our team from many sources on the internet. Hope this article on the topic What Does The C Mean In Math is useful to you.

NSE5 Study Guides

Issue 1

Which output profiles can you limit for report event notifications? (Choose two)

A.SMS

B. Transfer to another FortiAnaiyzer device

C. Upload to a server

D. Email

Answer: C, D

Issue 2

Which statements are true about content archiving, also known as data loss prevention (DLP) archiving? (Choose two)

A. Allows complete and summary archiving

B. It is configured globally for all policies.

C. The default behavior is to perform a full archive.

D. The DLP engine examines email, FTP, NNTP and web traffic.

Answer: A, D

Issue 3

Given that Antivirus and IPS update service is enabled, and FortiGuard settings as shown in the exhibit. The desired behavior is for managed devices to use public servers for these updates if FortiManager becomes inaccessible, which is not the case with the current configuration. What two actions are needed to correct this? (Choose two)

A. Change the server override mode from strict to loose.

B. Change pat from 8890 to 443 in Use Override Server Address for FortiGate/FortiMail settings.

C. Uncheck Use priority server address for FortiGate/FortiMail.

D. Change the IP address to a public FDS server and tap 443 in the Use alternate server address for FortiGate/FortiMail settings.

Answer: A, C

Question: 4

Which remote authentication servers can you configure to validate your FortiAnalyzer administrator logins? (Choose three)

A. RADIUS

B.Local

C.LDAP

D.ICP

E. TACACS+

Answer: A, C, E

Question: 5

Which two statements are correct regarding synchronization between primary and secondary devices in a FortManager HA duster? (Choose two)

A. The ncbdng global databases of Al device configurations are synchronized in the HA cluster,

B. FortiGuard databases are downloaded separately by each device in the cluster.

C. FortiGuard databases are downloaded by the primary FortManager device and then synchronized with all secondary devices.

D. Local logs and log configuration settings are synchronized across the HA cluster.

Answer: A, B

Question: 6

Workflow mode introduces what new permissions for Super_Admin administrative users?

A. Self-Approval, Approval, Rejection

B. Self-Disapproval, Approval, Acceptance

C. Approval, Self-Approval, Change Notification

D. Change Notification, Self-Disapproval, Send

Answer: C

Question: 7

Which two statements are correct regarding header and footer policies? (Choose two)

A. Header and footer policies can only be created from the ADOM root.

B. Header and footer policies can only be created in global ADOM.

C. Header and footer policies are created in policy packages and assigned to ADOM policy packages.

D. Header and footer policies can be modified in the affected ADOM policy package.

Answer: B, C

Issues: 8

Which two statements are correct about accounts and administrative users? (Choose two)

A. Administrative user accounts can exist locally or remotely.

B. Administrative user login information is available to all administrators through the

C. Administrative users must be assigned an administrative profile.

D. Administrative user access is limited to administrative profiles only.

Answer: A, C

Question: 9

Which statement correctly compares FortiManager physical and virtual appliances?

A. Both physical and virtual FortiManger appliances can manage an unlimited number of devices and have unlimited storage.

B. FortiManger physical and virtual appliances use licenses to increase managed device and storage capacity limits.

C. FortiManger physical and virtual appliances have an unlimited daily logging rate.

D. Physical and virtual FortiManger appliances use model types and licenses respectively to differentiate managed device and storage capacity limits.

Answer: D

Question: 10

What is the purpose of locking an ADOM revision?

A. To prevent further changes from Device Manager,

B. To disable revision history.

C. To prevent automatic deletion.

D. To lock the Policy and Objects tab.

Answer: C

Question: 11

What are the two statements describing the status of a “changed” device settings in the Managed FortiGate Device Setup and Setup Status widget?

A. Configuration changes were made directly on the managed device,

B. Configuration changes have been made from Device Imager for a managed FortiGate e device.

C. Rebuttal changes have been applied to a managed FortiGate device.

D. Rebuttal changes in Device Manager no longer calculate the latest revision in the device’s revision history.

Answer: B

Question: 12

What effect do administrative domains (ADCM) have on report parameters? (Choose two)

R. Hone. ADOMs cannot be used with reports.

B. Reports must be configured with (its own ADOM.

C. Chart Library, Macro Library, Dataset Library, and Output Profile become ADOM-specific.

D. The Dataset Library becomes global for all ADOMs.

Answer: B, C

Question: 13

Which statements about disk log quota are true? (Choose two)

A. The FortiAnalyzer stops logging once the disk log quota is reached.

B. The FortiAnalyzer automatically sets the disk log quota based on the device.

C. The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is reached.

D. The FortiAnalyzer disk log quota is configurable, but has a minimum of 100 MB to a maximum depending on system reserved space.

Answer: C, D

Question: 14

What ports are commonly used by FortWanager? (Choose two)

A. TCP 541 for remote management of a ForUGate unit.

B. TCP 5199 HA heartbeat or synchronization (FortMaTager HA cluster).

C. TCP 703 HA heartbeat or synchronization (FortiManager HA duster).

D. TCP 514 for remote management of a urat FortiGate.

Answer: A, B

Question: 15

Which statements are true about FortiAnalyzer’s processing of High Availability (HA) dust collectors? (Choose two)

A. FortiAnalyzer distinguishes between different devices by their serial number.

B. FortiAnalyzer receives logs from d devices in a feather duster.

C. FortiAnalyzer receives bgs only from the main cluster device.

D. FortiAnalyzer only needs to know (the serial number of the main device in the cluster – it automatically discovers the other devices.

Answer: A, B

Question: 16

If RAID is not supported, what are other types of backup mechanisms (i.e. methods to retain your log data in the event of disk failure, deletion, or corruption? (Choose three answers)

A. Backup logs via web manager or CLI.

B. Forwarding logs a syslog server.

C. Uploading logs to an FTP, SFTP or SCP server.

D. Log Archiving.

E. Enabling Full Archiving.

Answer: A, B, C

Question: 17

Which statement correctly names the supported administrative domain modes on FortiManager?

A. Normal and Analyzer

B. Backup and Analyzer

C. Normal, backup and collector

D. Normal and Backup,

Answer: D

Question: 18

What tabs are available on the FortiManger web manager? (Choose two)

A. Device Manager

B. Policy and Objects

C.FortiGate

D. Database

Answer: A, B

Question: 19

How does FortiAnalyzer work? (Choose two)

A. Autonomous

B.Manager

C. Analyzer

D. Collector

Answer: C, D

Question: 20

What are three different methods you can use to send event notifications when an event occurs that matches a configuration that matches a configured event handler?

A. Email

B.SMS

c.SNMP

SUN

E.Syslog

Answer: A, C, E

Question: 21

What is “hot swapping”?

A. Hot swapping means administrators can limit FortiAnalyzer to writing to all hard devices to make the array fault tolerant.

B. Hot swapping means that administrators can replace a failed disk on devices that support software RAID while the device is still running.

C. Hot swapping means that administrators can ensure that a redundant drive’s parity data is valid while the device is still running.

D. Hot swapping means that administrators can replace a fated d* on devices that support hardware RAID while the device is still running.

Answer: D

Questions: 22

Refer to the exhibit. What does the clock icon indicate next to the Bandwidth and Applications report?

A. This is a personalized report.

B. This is a report submitted from a different FortiAnalyzer device or a different (but supported) ADOM.

C. This is h the generation process.

D. This is a scheduled report.

Answer: D

Video about What Does The C Mean In Math

You can see more content about What Does The C Mean In Math on our youtube channel: Click Here

Question about What Does The C Mean In Math

If you have any questions about What Does The C Mean In Math, please let us know, all your questions or suggestions will help us improve in the following articles!

The article What Does The C Mean In Math was compiled by me and my team from many sources. If you find the article What Does The C Mean In Math helpful to you, please support the team Like or Share!

Rate Articles What Does The C Mean In Math

Rate: 4-5 stars
Ratings: 6717
Views: 13007438

Search keywords What Does The C Mean In Math

What Does The C Mean In Math
way What Does The C Mean In Math
tutorial What Does The C Mean In Math
What Does The C Mean In Math free
#NSE5 #Study #Guides

Source: https://ezinearticles.com/?NSE5-Study-Guides&id=9712716